Knowledge Base

How to set up a QNX Trusted Disk   ________________________________________________________________________ Applicable Environment ________________________________________________________________________ Topic: QNX Trusted Disk, QTD SDP: 7.0.0, 7.1.0 Target: AArch64, x86_64 ________________________________________________________________________ Question ________________________________________________________________________ How to set up a QNX Trusted Disk with the qnx6 filesystem ________________________________________________________________________ Solution ________________________________________________________________________ Please review the attached document (qtd_example.txt), which includes details on how to setup QTD. Below is the summary of the steps involved in the example: On the host Generate RSA public/private keys using openssl Create the qnx6 image Create the QTD image On the target Create a RAM disk interface Copy the image to /dev/hdX Mount the QTD image Mount the qnx6 image. ________________________________________________________________________ NOTE: This entry has been validated against the SDP version listed above. Use caution when considering this advice for any other SDP version. For supported releases, please reach out to QNX Technical Support if you have any questions/concerns. ________________________________________________________________________ Related Attachments   Attachment Name   Size   Last Modified   qtd_example.txt   9KB   11/5/2023 1:58 AM   qnx6.build   51 bytes   10/27/2023 6:36 PM   testfile   4 bytes   10/27/2023 6:36 PM

Please contact us with your questions or concerns.