Knowledge Base

How to use io-sock on the Raspberry Pi 4B   ________________________________________________________________________ Applicable Environment ________________________________________________________________________ Topic: Building an image with io-sock on the Raspberry Pi 4B SDP: 7.1.0 Target: AArch64 ________________________________________________________________________ Question ________________________________________________________________________ How can I use the io-sock networking stack on a Raspberry Pi with SDP 7.1.0? ________________________________________________________________________ Recommendation ________________________________________________________________________ The build file attached to this article is a SDP 7.1.0 Raspberry Pi 4B image build file using io-sock with a driver for the genet Ethernet interface. To get the correct drivers for io-sock, ensure that you have the following package installed in addition to the BSP package: com.qnx.qnx710.target.net.devsfdt ________________________________________________________________________ NOTE: This entry has been validated against the SDP version listed above. Use caution when considering this advice for any other SDP version. For supported releases, please reach out to QNX Technical Support if you have any questions/concerns. ________________________________________________________________________ Related Attachments   Attachment Name   Size   Last Modified   rpi4.build   28KB   8/8/2024 6:18 PM

Please contact us with your questions or concerns.