QNX Technical Articles
QNX® Momentics® 6.2.1 PE - Broadcom BCM91250A/E and BCM91125E BSP - Release Notes
QNX® Momentics® 6.2.1 PE
Broadcom BCM91250A/E and BCM91125E BSP
Release Notes
Date of this edition: October 24, 2003
Target OS: QNX® Neutrino® 6.2.1 Patch B
Host OS: Microsoft Windows XP/2K/NT SP4, Sun Solaris 2.8, QNX® Neutrino® 6.2.1B
| For information on installing this BSP, see the installation note. |
Contents
- Known issues
| Throughout this document, you may see reference numbers associated with particular issues, changes, etc. When corresponding with our Technical Support staff about a given issue, please quote the relevant reference number. You might also find the reference numbers useful for tracking issues as they become fixed. |
Known issues
- When the Broadcom BCM91250A board is in Big Endian mode, it detects only 128M when the 2x128M of RAM is noninterleaved. If the RAM is interleaved, RAM detection functions properly. (Ref #17414)
- The 64-bit PCI slots don't function properly. (Ref# 10942)
- The Ethernet network driver (devn-bcm1250.so) may sometimes hang the board when under heavy load. (Ref# 16296)
- The SMP process manager/kernel (procnto-smp) for both MIPSLE and BE core-dumps randomly. (Ref# 16503)
Updated procnto-smp available
We recommend that you update the 6.2.1 or 6.2.1B version of procnto-smp. To do this, download and install two new procnto-smp components (for MIPSLE and for MIPSBE):
- Log into the myQNX Account area at the QNX Software Systems website (www.qnx.com).
- Once you have logged in, select Experimental section of the Download Software area.
*Note: You will be required to Register your products and support plans to gain access to restricted downloads.