Configuring the hypervisor host

For details about how to write QNX buildfiles, including buildfile structure, contents, and syntax, see the OS Image Buildfiles chapter in the QNX OS Building Embedded Systems guide.

The buildfile for a hypervisor host differs from buildfiles for standard QNX OS images in the following sections:

Virtualization extension module

The virtualization extension module (libmod_qvm-safety.a) is included. For example, a buildfile for the hypervisor host for a supported ARM platform would begin as follows:

[+compress]
[image=0x40100000]
[uid=0 gid=0]
[virtual=aarch64le,raw] boot = {
    [+keeplinked] startup-rcar_h3 -P1 -W -vv
    [+keeplinked module=qvm-safety module=aps-safety] \
PATH=/proc/boot:/sbin:/bin:/usr/bin:/opt/bin/sbin:/usr/sbin
    LD_LIBRARY_PATH=/proc/boot:/lib:/usr/lib:/lib/dll:/opt/lib \
procnto-smp-instr-safety -ae -v
}

Of particular interest in this example is module=qvm-safety, which brings the virtualization module into the build.

DANGER:

When using the QHS, you must specify that you want the safety variant of the kernel module, by adding [module=qvm-safety] instead of [module=qvm]. For more information, see the QNX Hypervisor for Safety 2.2 Safety Manual.

Host domain code

The buildfile contains instructions to include and start the qvm, and other code that will run in the hypervisor host domain. For example, the following command includes and starts a qvm process instance, which assembles a VM:

qvm

VM (qvm) configuration files

The buildfile includes the paths to the configuration files that different qvm process instances use when creating and assembling VMs, and indicates where to place these configuration files in the image. For example:

/vm/config/qnx71.qvmconf = guests/qnx71/qnx71.qvmconf

Virtual device (vdev) shared objects

The virtual device modules (vdev-*.so) are included in the shared objects list. For example:

vdev-8259.so
vdev-ser8250.so
vdev-timer8254.so
vdev-mc146818.so
vdev-virtio-console.so
vdev-virtio-blk.so
vdev-virtio-net.so
vdev-shmem.so
vdev-pckeyboard.so
vdev-ioapic.so
vdev-pci-dummy.so
vdev-hpet.so
vdev-pl011.so
vdev-vgpu-gvtg.so
vdev-progress.so

Unused component removal

The buildfile should include only components required by the hypervisor host.

You should remove all components that aren't required, so that they don't get included in the hypervisor host image. For example, if a device (e.g., USB) is passed through to a guest, the hypervisor host (or another guest) may not also have access to the device, so you should remove the driver from the hypervisor host buildfile (see pass in the VM Configuration Reference chapter).

Safety variants for the QNX Hypervisor for Safety (QHS)

Safety variant support for PCI pass-through devices

If your hypervisor system will pass through PCI devices, you must include the pci_server-qvm_support.so module in your hypervisor host. For instructions, see pci-server in the QNX Neutrino Utilities Reference.